Makita 18V 5.0Ah Brushless 2 Piece Driver Combo Kit

  • $649.00


Makita DLX2214G

Kit Includes

  • DHP481 - Brushless Hammer Drill Driver
  • DTD154 - Brushless Impact Driver
  • 2 x 18V 5.0Ah Batteries
  • Fast Charger
  • Case

Makita DHP481Z 18V Li-ion Cordless Brushless Hammer Driver Drill - Skin Only - DHP481Z

Features:

  • Single sleeve keyless chuck
  • Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications
  • Mode ring selection
  • Mechanical 2 speed gearing
  • Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
  • All metal gear construction
  • Twin LED job light with after-glow function
  • Battery fuel gauge shows power remaining in battery
  • Single sleeve keyless chuck allows for easy bit installation.removal by one hand
  • High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
  • Extreme Protection Technology with enhanced dust and drip resistant performance

Specifications:

  • Voltage: 18V
  • Impacts Per Minute
    • Hi: 0 - 31,000ipm
    • Lo: 0 - 8,250ipm
  • Max Fastening Torque:
    • Hard: 115Nm
    • Soft: 60Nm
  • No Load Speed:
    • Hi: 0 - 2,100rpm
    • Lo: 0 - 550rpm
  • Capacity:
    • Masonry: 16mm
    • Steel: 13mm
    • Wood: 76mm
  • Dimensions (L x W x H): 205mm x 79mm x 249mm

Makita DTD170Z 18V Li-ion Cordless Brushless 6-Mode Impact Driver - Skin Only - DTD170Z

The worlds smartest Impact Driver, DTD170Z, features six modes for tackling any task - Max, hard, medium, soft, tex and assist mode. With assist mode in use, when fastening screws the driver starts slowly when trigger is fully depressed, in order to stabilise the screw. Once the driver begins to impact the speed is automatically increased to maximum RPM to drive home the screw. Assist mode is perfect for timber drilling, and Tex mode for metal drilling.

The DTD170Z features a high performance brushless DC motor, providing the user with more work amount of a single full battery charge and durable against long continuous operation. It also features the shortest body in the impact driver market with its well balanced design, wide illumination twin high-brightness LED lights with pre and after-glow functions and easy to operate with its large touch screen panel.

Features:

  • High performance brushless motor
  • 4 stage impact power selection
  • A Mode: helps to eliminate "screw cam out" and "cross threading" by driving at low speed unit screw begings to tighten 
  • T Mode: for fastening mode for self drilling screws
  • Compact at only 117mm overall length
  • LED joblight
  • One touch bit installation
  • Ergonomically designed rubberised soft grip

Specifications:

  • Voltage: 18V
  • Drive Shank: 6.35mm (1/4") Hex
  • Impact Rate:
    • 1st: 0-3,800ipm
    • 2nd: 0-3,600ipm
    • 3rd: 0-2,600ipm
    • 4th: 0-1,100ipm
  • Max Fastening Torque: 175Nm
  • No Load Speed:
    • 1st: 0-3,600rpm
    • 2nd: 0-3,200rpm
    • 3rd: 0-2,100rpm
    • 4th: 0-1,100rpm
  • Capacity:
    • Coarse Thread: 22-125mm
    • High Tensile Bolt: M5-M14
    • Machine Screws: M4-M8
    • Standard Bolt: M5-M16
  • Weight: 1.2kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Up to 66% more run time per charge compared to BL1830
  • Fast 45 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 5.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 45 minutes
  • Weight: 0.6kg

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:

  • Voltage: 18V
  • Cell capacity: 1.5Ah - 6.0Ah
  • Charge Time: 
    • 1.5Ah: 15mins
    • 3.0Ah: 22mins
    • 4.0Ah: 36mins
    • 5.0Ah: 45mins
    • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia

Hard Carry Case